Model |
BC3148TM2Q4H |
InterfaceCharacteristics |
Fixed Port |
1*USB 2.0 port
1*RS232 Console port (9600,8,N,1) 48*1/10G SFP+ fiber ports (Data) 2*40G QSFP28 uplink fiber ports (Data)
4*40G/100G QSFP28 uplink fiber ports (Data) |
Ethernet Port |
10/100/1000Base-T auto-sensing, Full/half duplex MDI/MDI-X
self-adaption |
Twisted Pair Transmission |
10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T: Cat5e or later UTP(≤100 meter) |
Optical Fiber Port |
10G SFP+/ QSFP28 optical fiber ports, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) 10G SFP+ optical fiber port can be backward
compatible with 1G optical fiber module. |
Optical Cable/
Distance |
Multi-mode: 850nm / 0 ~ 500m, single mode: 1310nm/ 0 ~ 40km,
1550nm/ 0 ~ 120km. |
Chip Parameter |
Network |
L3 |
Management Type |
|
Network Protocol |
IEEE802.3u 100Base-TX , IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X, IEEE802.3ae 10Gb/s Ethernet, IEEE802.3x |
Forwarding Mode |
Store and Forward(Full Wire Speed) |
Switching Capacity |
1.96Tbps (non-blocking) |
Forwarding
Rate@64byte |
1428Mpps |
MAC |
64K |
Buffer Memory |
64M |
Jumbo Frame |
16K |
LED Indicator |
Power: PWRA,PWRB (green), system: SYS (green), Fiber port: 1-4
(green), Network management: MNG (green) |
Power Supply |
Total PWR / Input
Voltage |
480W*2/ (AC100-240V) |
Power Consumption |
Standby<50W,Full Load<160W |
Power Supply |
Built-in power supply AC100~240V 50-60Hz 5.0A*2 |
PhysicalParameter |
Operation TEMP /
Humidity |
-20~+55°C, 5%~90% RH Non condensing |
Storage TEMP /
Humidity |
-40~+75°C, 5%~95% RH Non condensing |
Dimension (L*W*H) |
442.5*404*44mm |
Net /Gross Weight |
<6.8kg / <7.0kg |
Installation |
Desktop,19 inch 1U cabinet installation |
Certification& Warranty |
Lightning protection /
protection level |
Port lightning protection: 6KV 8/20us, Protection level: IP30 |
Certification |
CCC, CE mark, commercial, CE/LVD EN60950
FCC Part 15 Class B, RoHS |
Warranty |
3 years, lifelong maintenance. |
NetworkManagementFeatures |
Virtualization and Stacking |
Virtualization
Distributed equipment management, distributed link aggregation, distributed flexible routing
Stacking via standard Ethernet interface Local stacking and remote stacking
MAD stack split detection based on LACP, BFD, ARP |
IPv4 |
PBR, ECMP
BFD for OSPF, BGP
Static routing, RIP v1/v2, OSPF, BGP,IS-IS,BEIGRP |
IPv6 |
MLD V1/V2, MLD snooping
ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet IPv6 Static Routing, RIPng, OSPFv3,BGP4+ Manual tunnel, ISATAP tunnel, 6 to 4 tunnel
IPv6 neighbor discovery, Path MTU Discovery |
MAC Switching Capacity |
Black-hole MAC items IEEE 802.1AE MacSec
MAC address filtering function
Check and delete MAC address Configuring MAC address aging time |
|
Limit on MAC address learning number
Static configuration and dynamically learning of MAC address |
VLAN |
GVRP
Private VLAN 4K Active VLAN
QinQ & selective QinQ
1:1 and N:1 VLAN Mapping |
Link Aggregation |
10GE port aggregation, Static aggregation, Dynamic aggregation |
Flow Monitoring |
sFLOW |
DHCP |
DHCP server/relay/client/snooping DHCP auto-config and CWMP-TR069
DHCP Snooping option82/DHCP Relay option82 |
STP/ERPS |
ERPS(G.8032)
802.1D (STP), 802.1W (RSTP),802.1S (MSTP)
BPDU protection, root protection and ring protection |
Multicast |
IGMP V1/v2/v3 IGMP Snooping IGMP Fast Leave PIM-SM and PIM-DM
Multicast traffic cross VLAN duplication
Multicast group policy and multicast number limit |
ARP |
Free ARP, Static entry, ARP anti-attack Standard proxy ARP and local proxy ARP
Dynamic ARP Inspection, ARP source suppression
ARP inspection (check according to DHCP Snooping, 802.1x table entry, or IP/MAC static binding) |
Mirroring |
Flow mirroring, N:4 port mirroring, Local and remote port mirroring |
MPLS VPN |
MCE MPLS TE
MPLS OAM
LDP protocol
P/PE of MPLS VPN |
QoS/ACL |
CAR flow limit
Tail-Drop and WRED 802.1p/DSCP priority mapping Traffic policing and traffic shaping
DRR, SP, and DRR+SP queue scheduling algorithms
Hash load balancing to ensure the integrity of the traffic output session Traffic classification based on each field of the L2/L3/L4 protocol header Ingress and Egress ACL, matching L2, L3, L4, and IP quintuple, copy,
forward, and discard |
Security |
uRPF
Port isolation
Radius and BDTacacs+ IEEE 8021x certification
DHCP Snooping, DHCP Option 82 Command line hierarchical protection Port security, IP + MAC + port binding
Identification and filtering of L2/L3/L4 based ACL
Suppression of broadcast, multicast, and unknown unicast packet Defend against DDoS attack, SYN Flood attack of TCP, and UDP Flood
attack |
Reliability |
ISSU EAPS,ERPS HSRP,VRRP
GR for OSPF and BGP BFD for OSPF and BGP Power supply 1+1 backup
Static/LACP link aggregation and cross service card link aggregation |
Management |
NTP ISSU
Track System logs Ping,Tracert Power alarm Graded alarm
SNMP v1/v2/v3 RMON event history 802.1AG and 802.3AH
Fan, temperature alarm Console,Telnet,SSH 2.0 Debug information output Web browser management Telnet remote maintenance ZTP(Zero Touch Provisioning)
sFLOW and other traffic statistics analysis SNMP(Simple Network Management Protocol)
File upload and download management in TFTP mode |
Energy Saving |
IEEE802.3az green energy Ethernet |
System |
Category 5 Ethernet network cable
Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or higher
TCP/IP, network adapter, and network operating system (such as
Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network |
Reviews
There are no reviews yet.