Born Electronics

+44 7859 571344

Call Us

info@bornelectronics.com/born

Email Us

C/O Blake and Ernst 25 Cabot Square, 14th Floor, London, England, E14 4QA

BI8104PBGM2F INDUSTRIAL L2+ MANAGED 4 PORT HIGH POE GIGABIT SWITCH + 2 *1G SFP UPLINK

BI8104PBGM2F is a full Gigabit managed bt industrial PoE switch. It has 4*10/100/1000M bt PoE ports and 2*100/1000M SFP fiber slot ports. Port 1-4 can support IEEE802.3af/at/bt PoE standard. Single-port PoE power output is 90W. As a PoE power supply device, it can automatically detect and recognize the power-receiving equipment that meets the standard and supply power through the network cable. It provides stable and safe terminals for PTZ network domes, high-power wireless AP, high-power network multimedia speakers, and high-power POE lighting, etc. through a network cable to meet the network environment that needs high-density PoE power supply. It is suitable for intelligent transportation, rail transit, electric power, mining, metallurgy and green energy. Industrial scenes such as construction set up a cost-effective and stable communication network.
The BI8104PBGM2F has L2+ full network management function, support IPV4/ IPV6 management, static route full line rate forwarding, security protection mechanism, ACL/QoS policy and VLAN, and is easy to manage and maintain. Support multiple network redundancy protocols STP/RSTP/MSTP (<50ms) and (ITU-T G.8032) ERPS (<20ms) to improve link backup and network reliability. When one-way network fails, communication can be quickly restored to ensure important Uninterrupted communication for applications. According to the actual application requirements, you can configure multiple application services such as PoE power management, port traffic control, VLAN division, and SNMP through the Web network management mode.

Category:

Features

Gigabit access, SFP fiber port uplink

  • Support Gigabit Ethernet port and Gigabit SFP port combination, which enables users to flexibly build networking to meet the needs of various scenarios.
  • Support non-blocking wire-speed forwarding.
  • Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.

Intelligent PoE power supply

  • 4*10/100/1000Base-T RJ45 ports can support bt PoE power supply, meeting the demand for super high power PoE power supply in various scenarios.
  • IEEE802.3af/at PoE standard, without damaging non-PoE devices.
  • Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
  • Set on the Web network management interface to control the PoE port power supply based on the user-defined time period.
  • Customize the output power of the PoE port, the output power range covers the 5-90W PoE terminal load, providing a more practical configuration for the flexible use and control of PoE.

PoE network management and fast Ring function

  • IEEE802.1Q VLAN, flexible VLAN division,Voice VLAN and QinQ configuration.
  • QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including EQU, SP, WRR & SP+WRR.
  • ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.
  • IGMP V1/V2 and IGMP Snooping.
  • ERPS/STP/RSTP/MSTP.
  • Static and dynamic aggregation.

Security

  • 802.1X authentication.
  • Port isolation, Storm control.
  • IP-MAC-VLAN-Port binding.

Stable and reliable

  • CCC, CE, FCC, RoHS.
  • Low power consumption, no fan, aluminum shell.
  • The user-friendly panel can show the device status through the LED indicator of PWR, SYS, Link, L/A, PoE.

One-stop remote control and management

  • Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
  • HTTPS, SSLV3, and SSHV1/V2.
  • RMON, system log, LLDP, and port traffic statistics.
  • CPU monitoring, memory monitoring, Ping test, and cable diagnose.

Specifications

Model BI8104PBGM2F
Interface Characteristics
Fixed Port 4*10/100/1000M bt PoE ports (Data/Power) 2*100/1000M uplink SFP slot ports (Data)

1 * RS232 console port(115200,N,8,1)

2 group of V+, V- redundant DC power interface (5 Pin Phoenix terminal)
Ethernet Port Port 1-4 support 10/100/1000Base-T auto-sensing, full/half duplex

MDI/MDI-X self-adaption
Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meter)

100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T: Cat5e or later UTP(≤100 meter)
SFP Slot Port Gigabit SFP optical fiber interface, default no include optical modules (optional single-mode / multi-mode, single fiber / dual fiber optical

module. LC)
Optical Cable/ Multi-mode: 850nm /0 ~ 500M
Distance Single-mode: 1310nm /0 ~ 40KM, 1550nm /0 ~ 120KM.
Chip Parameter
Network

Management Type

 L2+
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX

IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching

Capacity

 128Gbps
Forwarding

Rate@64byte

 8.93Mpps
CPU 416MHz
DRAM 1G
FLASH 128M
MAC 8K
Buffer Memory 4M
Jumbo Frame 9.6K
LED Indicator Power/ System: SYS (Green) , Network: Link (Yellow), fiber port: L/A

(Green), PoE: PoE (Green)
Reset Switch Yes, (Press and hold for 10 seconds and release, the switch will restore

the factory settings)
PoE & Power Supply
PoE Port Port 1- 4 @bt POE and backward compatible with IEEE802.3af/at
PoE Management PoE working status

Delay start of power supply

PoE output priority configuration Scheduling of PoE operation and time Total power limit of PoE power supply

PoE output power allocation, on/off& af /at/bt
Power Supply Pin Default 1/2 (+), 3/6 (-), 4/5 (+), 7/8 (-)
Max Power Per

Port

 90W, IEEE802.3af/at/bt
Power

Consumption

 Standby<8W, Full load<240W
Working Voltage 48-57VDC, 5 Pin industrial Phoenix terminal, support anti-reverse

protection.
Power Supply No, optional 48V/240W or 48V/480W industrial power supply
Physical Parameter
Operation TEMP /

Humidity

 -40~+80°C, 5%~90% RH Non condensing
Storage TEMP /

Humidity

 -40~+85°C, 5%~95% RH Non condensing
Dimension

(L*W*H)

 145*134.5*47.5mm
Net /Gross

Weight

 <0.6kg / <0.8kg
Installation Desktop, 35mm DIN rail
Certification & Warranty
Lightning Protection Lightning protection: 6KV 8/20us; Protection level: IP40 IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge IEC61000-4-3(RS):10V/m(80~1000MHz)

IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV

IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz) IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s

IEC61000-4-9(pulsed magnet field):1000A/m IEC61000-4-10(damped oscillation):30A/m 1MHz IEC61000-4-12/18(Shock-wave):CM 2.5kV,DM 1kV

IEC61000-4-16(common-mode transmission):30V; 300V,1s FCC Part 15/CISPR22(EN55022):Class B

IEC61000-6-2(Common Industrial Standard)
Mechanical

Properties

 IEC60068-2-6 (anti vibration), IEC60068-2-27 (anti shock)

IEC60068-2-32 (free fall)
Certification CCC, CE mark, commercial, CE/LVD EN60950, FCC Part 15 Class B,

RoHS
Warranty 5 years, lifelong maintenance.
Network Management Features
Interface IEEE802.3X (Full-duplex)

Port temperature protection setting

Port green Ethernet Energy-saving setting Broadcast storm control based on port speed
The speed limit of the message flow in the access port.

The minimum particle size is 64Kbps.
Layer 3 Features L2+ network management ,IPV4/IPV6 management

L3 soft routing forwarding, Static route, Default route @ 128 pcs, APR @ 1024 pcs
VLAN Voice VLAN, QinQ configuration

4K VLAN based on port, IEEE802.1q

Port configuration of Access, Trunk, Hybrid

VLAN based on MAC, VLAN based on the protocol
Port Aggregation LACP, Static aggregation

Max 3 aggregation groups and 8 ports per group.
Spanning Tree STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
Industrial Ring

Network Protocol

 G.8032 (ERPS), Recovery time less than 20ms

250 Ring at most, Max 250 devices per ring.
Multicast MLD Snooping v1/v2,Multicast VLAN

IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
Port Mirroring Bidirectional data mirroring based on port
QoS Flow-based Rate Limiting Flow-based Packet Filtering 8*Output queues of each port 802.1p/DSCP priority mapping

Diff-Serv QoS,Priority Mark/Remark

Queue Scheduling Algorithm (SP, WRR, SP+WRR)
ACL Port-based Issuing ACL,ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL

based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Security IP-MAC-VLAN-Port binding ARP inspection,Anti-DoS attack

AAA & RADIUS,MAC learning limit Mac black holes,IP source protection

IEEE802.1X & MAC address authentication Broadcast storm control,Backup for host datum

SSH 2.0,SSL,Port isolation,ARP message speed limit

User hierarchical management and password protection
DHCP DHCP Client,DHCP Snooping,DHCP Server,DHCP Relay
Management One-key recovery Cable Diagnose,LLDP

Web Management (HTTPS) NTP,System work log,Ping Test CPU instant utilization status view

Console/AUX Modem/Telnet/SSH2.0 CLI

Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3

NMS – smart network management system platform(LLDP+SNMP)
System Category 5 Ethernet network cable

Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;

TCP/IP, network adapter, and network operating system (such as
Microsoft Windows, Linux, or Mac OS X) installed on each computer in a

network

Application

Dimensions

Order Information

PACKING LIST CONTENT QTY UNIT
6-port full gigabit managed bt industrial PoE switch 1 SET
RJ45-DB9 Line 1 PC
User Guide 1 PC

Reviews

There are no reviews yet.

Be the first to review “BI8104PBGM2F INDUSTRIAL L2+ MANAGED 4 PORT HIGH POE GIGABIT SWITCH + 2 *1G SFP UPLINK”

Your email address will not be published. Required fields are marked *

Related products

Scroll to Top