| Model |
BI848PGM4T-600W |
| Interface Characteristics |
| Fixed Port |
48*10/100/1000Base-T PoE ports (Data/Power)
4*1/10G uplink SFP+ slot ports (Data)
1 * console port(115200,N,8,1) |
| Ethernet Port |
10/100/1000Base-T,Auto-sensing,Full/half duplex MDI/MDI-X self-adaption |
Twisted Pair
Transmission |
10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-T: Cat5e or later UTP(≤100 meter) |
| SFP Slot Port |
1/10G SFP+ optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) |
| Optical Cable/ Distance |
Multimode: 850nm 0 ~ 500M,
Single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM. |
| Chip Parameter |
| Network Management Type |
L2+ |
| Network Protocol |
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;
IEEE802.3u 100Base-TX;
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X
IEEE802.3ae 10GBase-SR/LR
IEEE802.3x |
| Forwarding Mode |
Store and Forward(Full Wire Speed) |
| Switching Capacity |
598Gbps |
Forwarding
Rate@64byte |
131Mpps |
| MAC |
32K |
| Buffer Memory |
32M |
| Jumbo Frame |
9.6K |
| LED Indicator |
Power: PWR (yellow), System : SYS (yellow), Network: Link/Act (yellow); SFP: L/A (green), PoE: PoE (green) |
| Reset Switch |
Yes, One-button factory reset |
| PoE & Power |
| PoE Port |
Port 1 to port 48 |
| PoE Management |
Total power limit of PoE power supply
PoE output power allocation, off& af &at
PoE output priority configuration
PoE working status
Delay start of power supply
Scheduling of PoE operation and time |
| Power Supply Pin |
Default: 1/2 (+), 3/6 (-) |
| Max Power Per Port |
30W; IEEE802.3af/at |
| Total PWR / Input Voltage |
600W (AC100-240V) |
| Power Consumption |
Standby:<35W;Full load:<600W |
| Power Input Interface |
Dual input power interface, AC power supply priority, support anti-reverse protection, power-off automatic switching DC connection;
2 set DC12-48V input interfaces;
way alarm switch interface; 1 set of AC power input interface |
| Power Supply |
Built-in power supply, AC100~240V 50-60Hz 6.6A |
| Physical Parameter |
| Operation TEMP / Humidity |
-40~+80°C;5%~90% RH Non condensing |
| Storage TEMP / Humidity |
-40~+85°C;5%~95% RH Non condensing |
| Dimension (L*W*H) |
440*298*44.5mm |
| Net /Gross Weight |
<5.0kg / <5.8kg |
| Installation |
Desktop, 19 inch 1U cabinet |
| Certification & Warranty |
| Lightning protection / Protection level |
Lightning protection: 6KV 8/20us; Protection level: IP30
IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV
IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s
IEC61000-4-9(pulsed magnet field):1000A/m
IEC61000-4-10(damped oscillation):30A/m 1MHz
IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
IEC61000-4-16(common-mode transmission):30V; 300V,1s
FCC Part 15/CISPR22(EN55022):Class A
IEC61000-6-2(Common Industrial Standard) |
| Mechanical Properties |
IEC60068-2-6 (anti vibration)
IEC60068-2-27 (anti shock)
IEC60068-2-32 (free fall) |
| Certification |
CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS |
| Warranty |
5 years, lifelong maintenance. |
| Network Management Features |
| Interface |
IEEE802.3X (Full-duplex)
Broadcast storm control based on port speed
The speed limit of the message flow in the access port. The minimum particle size is 64Kbps.
Port temperature protection setting
Port green Ethernet Energy-saving setting |
| Layer 3 Features |
L2+ Network management
IPV4/IPV6 management
L3 soft routing forwarding,
Static route, Default route @ 128 pcs, APR @ 1024 pcs |
| VLAN |
4K VLAN based on port, IEEE802.1q
VLAN based on the protocol
VLAN based on MAC
Voice VLAN, QinQ configuration
Port configuration of Access, Trunk, Hybrid |
| Port Aggregation |
LACP, Static aggregation
Max 26 aggregation groups and 8 ports per group. |
| Spanning Tree |
STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s) |
Industrial Ring
Network Protocol |
G.8032 (ERPS),Recovery time less than 20ms
255 Ring at most, Max 254 devices per ring. |
| Multicast |
IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
MLD Snooping v1/v2,Multicast VLAN |
| Port Mirroring |
Bidirectional data mirroring based on port |
| QoS |
Diff-Serv QoS, Priority Mark/Remark
8*Output queues of each port
802.1p/DSCP priority mapping
Queue Scheduling Algorithm (SP, WRR, SP+WRR)
Flow-based Packet Filtering
Flow-based Redirection
Flow-based Rate Limiting |
| ACL |
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Port-based Issuing ACL.
ACL based on port and VLAN |
| Security |
User hierarchical management and password protection
SSH 2.0,SSL,Port isolation, ARP message speed limit
Broadcast storm control, Backup for host datum
IEEE802.1X & MAC address authentication
Mac black holes, IP source protection
AAA & RADIUS,MAC learning limit
ARP inspection, Anti-DoS attack
IP-MAC-VLAN-Port binding |
| DHCP |
DHCP Client, DHCP Snooping, DHCP Server, DHCP Relay |
| Management |
Console/AUX Modem/Telnet/SSH2.0 CLI
Web Management (HTTPS),Cable Diagnose, LLDP
Download & Management on FTP, TFTP, Xmodem, SFTP
SNMP V1/V2C/V3,One-key recovery
NTP, System work log, Ping Test
CPU instant utilization status view
NMS – Smart Network Management System Platform (LLDP+SNMP) |
| System |
Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;
Category 5 Ethernet network cable
TCP/IP, network adapter, and network operating system (such as MicrosoftWindows, Linux, or Mac OS X) installed on each computer in a network |
Reviews
There are no reviews yet.