Born Electronics

+44 7859 571344

Call Us

info@bornelectronics.com/born

Email Us

C/O Blake and Ernst 25 Cabot Square, 14th Floor, London, England, E14 4QA

52-port Full Gigabit Managed PoE Fiber Switch BC2148PGM4F-600W

The BC2148PGM4F-600W is a full gigabit managed PoE switch. It has 48*10/100/1000Base-T RJ45 ports and 4*100/1000Base-X SFP fiber slot ports. Port 1-48 can support IEEE802.3af/at standard PoE power supply. single port PoE power reaches 30W. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP phone, building visual access control intercom, etc. through network cable, to meet the network environment that needs high-density PoE power supply.It is suitable for hotels, campuses, parks, shopping malls, scenic spots, hospitals, factory dormitory and small and medium-sized enterprise.
The BC2148PGM4F-600W has L2+full Web management function, supports IPV4 management, static route full line rate forwarding, complete security protection mechanism, complete ACL/QoS policy and rich VLAN functions, and is easy to manage and maintain. Supports multiple network redundancy protocols STP/RSTP/MSTP (<50ms) to improve link backup and network reliability. When one-way network fails, communication can be quickly restored to ensure important Uninterrupted communication for applications. According to the actual application requirements, you can configure multiple application services such as PoE power management, port traffic control, VLAN division, and SNMP through the Web management mode.

Category:

Features

Gigabit wire speed access, SFP port uplink

  • Supports Gigabit Ethernet port and gigabit SFP uplink port combination, which enables users to flexibly build networking to meet the needs of various scenarios.
  • Support non-blocking wire-speed forwarding.
  • Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.

Intelligent PoE power supply

  • 48*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
  • IEEE802.3af/at PoE standard, without damaging non-PoE devices.
  • Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
  • PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.

Strong business processing capability

  • IEEE802.1Q VLAN, flexible VLAN division, and QinQ configuration.
  • QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including Equ, SP, WRR & SP+WRR.
  • ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.
  • IGMP V1/V2 and IGMP Snooping.
  • STP/RSTP/MSTP.
  • Static and dynamic aggregation.

Security

  • 802.1X authentication.
  • Port isolation,Storm control.
  • IP-MAC-VLAN-Port binding.

Stable and reliable

  • CCC,CE, FCC, RoHS.
  • Low power consumption, galvanized steel casing, The Fan active cooling.
  • Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
  • The user-friendly pane can show the device status through the LED indicator of PWR, Link ,PoE.

Easy operation and maintenance management

  • Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
  • HTTPS, SSLV3, and SSHV1/V2.
  • RMON, system log, LLDP, and port traffic statistics.
  • CPU monitoring, memory monitoring, Ping test, and cable diagnose.

Specifications

Model BC2148PGM4F-600W
Interface Characteristics
Fixed Port 48*10/100/1000Base-T PoE ports (Data/Power)

4*100/1000Base-X uplink SFP slot ports(Data)

1*RS232 console port(115200,N,8,1)
Ethernet Port Port 1-48 can support 10/100/1000BaseT(X) auto detect, full/half duplex MDI/MDI-X adaptive
Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meter)

100BASE-TX: Cat5 or later UTP(≤100 meter)

1000BASE-T: Cat5e or later UTP(≤100 meter)
SFP Slot Port Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Optical Cable/ Distance Multi-mode:850nm / 0~500M (1.25G), Single-mode:1310nm / 0~40KM, 1550nm / 0~120KM.
Chip Parameter
Network Management Type L2+
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T,IEEE802.3u 100Base-TX

IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X, IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 368Gbps (Non-blocking)
Forwarding

Rate@64byte

 77.38Mpps
CPU 750MHz
DRAM 1G
FLASH 256M
MAC 16K
Buffer Memory 12M
Jumbo Frame 10K
LED Indicator Power: PWR (Yellow), System: SYS (Yellow), Network: Link/Act (Yellow), PoE: PoE (Green), Fiber port: L/A(Green)
Reset Switch Yes, One-button factory reset
PoE & Power Supply
PoE Port Port 1 to 48
PoE Management PoE working status

Delay start of power supply

PoE output priority configuration

Scheduling of PoE operation and time

Total power limit of PoE power supply

PoE output power allocation, off& af &at
Power Supply Pin Default 1/2 (+), 3/6 (-)
Max Power Per Port 30W; IEEE802.3af/at
Total PWR / Input Voltage 600W (AC100-240V)
Power Consumption Standby<35W, Full Load<600W
Power Supply Built-in power supply, AC 100~240V 50-60Hz 6.6A
Physical Parameter
Operation TEMP / Humidity -20~+55°C, 5%~90% RH Non condensing
Storage TEMP / Humidity -40~+75°C, 5%~95% RH Non condensing
Dimension (L*W*H) 440*290*44.5mm
Net /Gross Weight <4.8kg / <5.5kg
Installation Desktop, 19 inch 1U cabinet
Certification & Warranty
Lightning Protection / Protection Level Lightning protection: 4KV 8/20us; Protection level: IP30
Certification CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS
Warranty 3 years, lifelong maintenance.
Network Management Features
Interface IEEE802.3X (Full-duplex)

Port temperature protection setting

Port green Ethernet Energy-saving setting

Broadcast storm control based on port speed

The speed limit of the message flow in the access port.

The minimum particle size is 64Kbps.
Layer 3 Features L2+ network management, IPV4 management

Static route, Default route @ 128 pcs, APR @ 1024 pcs

Communication between different network segments and different VLANs
VLAN VLAN based on MAC, QinQ configuration

Port configuration of Access, Trunk, Hybrid

4K VLAN based on port, IEEE802.1q,VLAN based on the protocol
Port Aggregation LACP, Static aggregation

Max 26 aggregation groups and 8 ports per group.
Spanning Tree STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
Multicast MLD Snooping v1/v2,Multicast VLAN

IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
Port Mirroring Bidirectional data mirroring based on port
QoS Flow-based Rate Limiting

Flow-based Packet Filtering

8*Output queues of each port

802.1p/DSCP priority mapping

Diff-Serv QoS,Priority Mark/Remark

Queue Scheduling Algorithm (SP, WRR, SP+WRR)
ACL Port-based Issuing ACL,ACL based on port and VLAN

L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
Security IP-MAC-VLAN-Port binding

ARP inspection,Anti-DoS attack

AAA & RADIUS,MAC learning limit

Mac black holes,IP source protection

IEEE802.1X & MAC address authentication

Broadcast storm control,Backup for host datum

SSH 2.0,SSL,Port isolation,ARP message speed limit

User hierarchical management and password protection
DHCP DHCP Client,DHCP Snooping, DHCP Server,DHCP Relay
Management One-key recovery

Cable Diagnose,LLDP

Web Management (HTTPS)

NTP,System work log,Ping Test

CPU instant utilization status view

Console/AUX Modem/Telnet/SSH2.0 CLI

Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3

NMS – smart network management system platform(LLDP+SNMP)
System Category 5 Ethernet network cable

Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;

TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network

Application

Panel Diagram

Dimensions

Order Information

Packing List Content Qty Unit
52-port full gigabit managed PoE switch 1 SET
RJ45-DB9 Line 1 PC
AC Power Cable 1 PC
Mounting Kits(Hanging Ear) 1 SET
User Guide 1 PC

Reviews

There are no reviews yet.

Be the first to review “52-port Full Gigabit Managed PoE Fiber Switch BC2148PGM4F-600W”

Your email address will not be published. Required fields are marked *

Related products

Scroll to Top