Born Electronics

+44 7859 571344

Call Us

info@bornelectronics.com/born

Email Us

C/O Blake and Ernst 25 Cabot Square, 14th Floor, London, England, E14 4QA

10GBASE-T SFP+ Copper Transceiver Hot Pluggable, 10Gb/s, Cat-6a/7 UTP Cable, 30 BT-SFP-10GRJ45

10GBASE-T copper SFP+ transceiver is a high performance, cost effective integrated duplex device compliant with the 10GBASE-T standards as specified in IEEE 802. 3-2006 and IEEE 802.3an for bi-directional communication up to 30 meters reach over cat 6a/7 cable.All four pairs in the cable are used with symbol rate at 2500Mbps on each pair.

Category:

Features

Features

  • Up to 10Gb/s bi-directional data links
  • Hot-plugg able SFP+ footprint
  • Commercial case temperature range (0°C to +70°C )
  • Fully metallic enclosure for low EMI
  • Power dissipation≤2.5W
  • Compact RJ-45 connector assembly
  • +3.3V single power supply
  • Access to physical layer IC via 2-wire serial bus
  • 10GBASE-T operation in host systems with XGMII interface
  • Smaller Form Factor: Interoperable with any SFP+ cage and connector system
  • SFF-8431 and SFF-8432 MSA Compliant
  • Compliant with IEEE Std 802.3an-2006
  • Compliant with FCC 47 CFR Part 15, Class B
  • Lower EMI Emissions
  • RoHS Compliant Products

Applications

  • 10 Gigabit Ethernet over Cat 6a/7 cable
  • Legacy Networks
  • Switch/Router with 10GBASE-T SFP+
  • Other Rack to Rack connections

Specification

General Specifications:

 

Parameter Symbol Min. Typical Max. Units Notes/Conditions
Data Rate BR 100 10,000 Mb/s IEEE 802.3an compatible.
Cable Length L 30 m Category 6a/7 UTP. BER <10-12

 

Environmental Specifications:

 

Parameter Symbol Min. Typical Max. Units Notes/Conditions
Operating Temperature Top 0 70 °C Case temperature
Storage Temperature Tsto -40 85 °C Ambient temperature

Mechanical Drawing

Mechanical drawing:

Mechanical Dimensions of Transceiver

 

Safe Use Recommendations:

10G copper SFP+ has a power draw from 2.0W up to 2.5W dependent upon cable length and SFP+ case temperature. Due to the unique power usage from this module, we offer these recommendations for safe use:

  1. Do not fill any more than 30% of the allotted switch ports to the 10G Copper SFP+
  2. Where possible, leave the adjacent SFP+ port empty
  3. The 10G Copper SFP+ can get hot to the touch due to the higher power consumption. This will not damage the SFP+ or the SFP+ port. However, care should be taken when handling a part when it is removed from a switch after time in

 

10Gbase DAC, 10G Copper SFP+,10G Optical SFP+ Compare：

 

Product Type SFP+ Direct Attach Cable SFP+ Copper Transceiver SFP+ Optical Transceiver
Compliance 10GBASE-KR 10GBASE-T 10GBASE-SR
Connector Type Integrated/None RJ-45 LC (Typical)
Medium Type Copper Twin Coaxial Twisted Pair Optical Fiber
Reach UP to 10m UP to 30m UP to 300m and over
 

Application Feild

 Switch to Switch connections(In one Rack) Rack to Rack Connections(In one Room) Building to Building Connections, City to City
Unit Cost Low Moderate Moderate
Power dissipation 0.5W Max 2.5W Max 1.5W Max
Extra Infrastructure None Copper Infrastructure Fiber Infrastructure
Solution Cost Moderate Moderate Moderate

Datasheet

Reviews

There are no reviews yet.

Be the first to review “10GBASE-T SFP+ Copper Transceiver Hot Pluggable, 10Gb/s, Cat-6a/7 UTP Cable, 30 BT-SFP-10GRJ45”

Your email address will not be published. Required fields are marked *

Related products

Scroll to Top