BIQ808PG2F4SC-120W

  • Home
  • BIQ808PG2F4SC-120W

Outdoor PoE Switch series BIQ808PGM2F4SC-200W

BIQ808PGM2F4SC-200W(30W) is an outdoor PoE switch. It is integrated of PoE switch, optical fiber tray, air breaker, lightning arrester etc. It has IP55 protection grade, can be for outdoor using. 4-channel SC connector single mode optical fiber tray.
It can be applied for surveillance monitoring, forest monitoring, etc.

  • AC220V mains power input, 200W DC52V power module inside.
  • With 8*10/100/1000M PoE downlink ports and 2*1000M SFP uplink ports, with L2 network management.
  • Supports 8 port PoE power each up to 30W.
  • Supports L2 management, such as QoS, VLAN, MSTP, Multi-broadcast, ports management and PoE management;
  • 6KV surge protection, 6KV contact / 8KV air ESD protection.
  • The box adopts waterproof (protection level IP55), anti-rust treatment, suitable for long time outdoor use.

Parameter

 Specifications

Power supply

AC100-240V, 50/60Hz

Consumption

Self-consumption<15W, PoE output 185W max

Downlink ports

1~8 ports: 10/100/1000Base-T 30W PoE RJ45(IEEE802.3af/at)

Uplink ports

Ports 9~10 1000Base-X SFP

Console port 

RJ45 to serial port (38400,8,N,1)

Reset key

Short press restart , ＞5s press recovery to default

Cable and distance

Use cat5e/6, 100m max.

Standard

IEEE802.3, IEEE802.3u, IEEE802.3z

Switch fabric

20Gbps

Though put

14.88Mpps

Buffer

1M

MAC address table

8K

Indicator

Power: 1 *red ;

Downlink 1~8: On RJ45 green LEDs indicate Link/Act, yellow LEDs indicate PoE

Uplink9, 10: On RJ45 green LEDs indicate Link/Act

Protection

Surge: 6KV, standard: IEC61000-4-5 ESD: 6KV: contact 8KV: air, standard:IEC61000-4-2

SPD

AC lightning arrester, 385v AC@20KA , 2p, - 40 ～ 70 ℃, lower incoming line, dxh06-fcs / 2r40

Working temperature

-20℃~65℃

Storage temperature

-40℃~85℃

Humidity

0~95%(No condensation)

Dimension(L×W×H)

280mm×200mm×260mm

Material

Metal

Colour

White

Net-weight

8KG
 

Software:

L2 Features

Port configuration

Auto-negotiation

Flow Control

Port Mirror

Traffic statistics

Link Aggregation

Static link aggregation

LACP

Algorithm based on Source/Destination MAC

Algorithm based on Source/Destination IP

8 groups

8 ports per group

MAC Table

Aging Time

Static MAC address

Dynamic MAC address management

VLAN

4K Active VLANs

4K VID

802.1Q Tag VLAN

Port VLAN

Protocol VLAN

MAC VLAN

Management VLAN

Voice VLAN

Q-in-Q

Private VLAN

GARP/GVRP

ACL

64 ACLs

L2, L3 e L4

Time-based ACL

Spanning tree

802.1D Spanning Tree Protocol (STP)

802.1w Rapid Spanning Tree Protocol (RSTP)

802.1s Multiple Spanning Tree Protocol (MSTP)

Loop Guard

Root Guard

TC-BPDU Guard

BPDU Guard

BPDU Filter

Multicast

256 groups

IGMP v1/v2/v3

Fast Leave

Multicast VLAN

Static Multicast

Multicast Filter

IGMP Statistics

MLD Snooping

PoE management

Support total power consumption control

Support single port PoE ON/OFF

Support port output priority

QOS

4 priority queues

CoS port-based

CoS 802.1p-based

CoS DSCP-based

Scheduling algorithms SP, WRR, SP+WRR

Storm Control (Broadcast, Multicast, Unknown Unicast)

Bandwidth control per port

Security Features

Port Security

MAC address filter

ARP Association (Manual, ARP scanning, DHCP snooping) up to 200 entries

ARP Protection

DoS (Denial of Service)

Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type

802.1x Autentication (port-based e MAC-based)

TACACS/TACACS+ Autentication

RADIUS Autentication

DHCP Filter

Guest VLAN

SSLv2/SSLv3/TLSv1

SSHv1/SSHv2

Restriction of WEB access based on: IP Address, And. MAC and Port

Port Isolation

Local User Name Password Authentication (2 levels)

Loopback detection

Management

SNMP v1/v2c/v3

RMON 4 grupos

WEB (HTTP/HTTPS)

CLI (Telnet, Console, SSHv1/v2)

Firmware upgrade via console/web/TFTP

Configuration Backup/Reload

All possible configurations in the CLI must exist in the WEB interface

LLDP

Other Features

DHCP Relay

DHCP Client

DHCP Snooping

DHCP Option 82

SNTP Client

BOOTP Client

Maintenance

Ping and Tracert

System log (Local and Remote)

Memory and CPU Monitoring
Version Describe
BIQ808PGM2F4SC-200W(30W) Outdoor PoE switch
AC 100~240V, 50/60Hz, 10A IN;
4-channel SC connector single mode optical fiber tray.
With 8 *10/100/1000M PoE ports and 2*1000M SFP ports;
Support 8 ports PoE power each up to 30W；
It has 200W built-in power supply, L2 network management.