Born Electronics

+44 7859 571344

Call Us

info@bornelectronics.com/born

Email Us

C/O Blake and Ernst 25 Cabot Square, 14th Floor, London, England, E14 4QA

36-Port 10G Uplink Managed PoE Switch BC2124PGM8FC4T-400W Series

36-Port 10G Uplink Managed PoE Switch BC2124PGM8FC4T-400W Series

The BC2124PGM8FC4T-400W is a 10G uplink L2+ managed PoE fiber switch. It has 24*10/100/1000Base-T adaptive RJ45 ports and 8*100/1000Base-X SFP fiber ports (combo port) and 4*1/10G SFP+ fiber slot ports. Port 1-24 can support IEEE802.3af/at PoE standard. Single-port PoE power reaches 30W. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP phone, building visual access control intercom, etc. through a network cable to meet the network environment that needs high-density PoE power supply. It is suitable for hotel, campus, factory dormitory and small and medium-sized enterprise.

The BC2124PGM8FC4T-400W has L2+ full network management function, supports IPV4/ IPV6 management, static route full wire-speed forwarding, complete security protection mechanism, complete ACL/QoS policy and rich VLAN functions, and is easy to manage and maintain. Supports multiple network redundancy protocols STP/RSTP/MSTP (<50ms) and (ITU-T G.8032) ERPS(<20ms) to improve link backup and network reliability. When one-way network fails, communication can be quickly restored to ensure important Uninterrupted communication for applications.

According to the actual application requirements, you can configure multiple application services such as PoE power management, port traffic control, VLAN division, and SNMP through the Web network management mode.

Category:

Features

Gigabit access, 10G fiber uplink

  • Support non-blocking wire-speed forwarding.
  • Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
  • Support Gigabit Ethernet port and10G SFP+ port combination, which enables users to flexibly build networking to meet the needs of various scenarios.

Intelligent PoE power supply

  • IEEE802.3af/at PoE standard, without damaging non-PoE devices.
  • PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
  • 24*10/100/1000Base-T RJ45 ports can support POE power supply to meet the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
  • Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.

Security

  • Support port isolation.
  • Support port broadcast storm suppression.
  • Support IP+MAC+port+VLAN quadruple flexible combination binding function.
  • Support 802.1X authentication to provide authentication functions for LAN computers, and control the authorization status of controlled ports according to the authentication results.

Strong business processing capability

  • Support ERPS ring network and STP/RSTP/MSTP to eliminate layer 2 loops and realize link backup.
  • Support IEEE802.1Q VLAN, Users can flexibly divide VLAN, Voice VLAN, and QinQ configuration according to their needs.
  • Support static and dynamic aggregation to effectively increase link bandwidth, realize load balancing, link backup, and improve link reliability.
  • Support QoS, port-based, 802.1P-based and DSCP-based three priority modes and four queue scheduling algorithms: Equ, SP, WRR, and SP+WRR.
  • Support ACL to filter data packets by configuring matching rule processing operations and time permissions, and provide flexible security access control policies.
  • Support IGMP V1/V2/V3 multicast protocol, IGMP Snooping meets multi-terminal high-definition video surveillance and video conference access requirements.

Stable and reliable

  • CCC, CE, FCC, RoHS.
  • Low power consumption, with fan, galvanized steel casing.
  • The user-friendly panel, it can show the device status through the LED indicator of PWR, Link, PoE.
  • Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.

Easy operation and maintenance management

  • Support CPU monitoring, memory monitoring, Ping detection, cable length detection.
  • Support HTTPS, SSLV3, SSHV1/V2 and other encryption methods, making management more secure.
  • Support RMON, system log, and port traffic statistics to facilitate network optimization and transformation.
  • Support LLDP to facilitate the network management system to query and judge the communication status of the link.
  • Support Web network management, CLI command line (Console, Telnet), SNMP (V1/V2/V3) and other diversified management and maintenance.

Specifications

Model BC2124PGM8FC4T-400W
Interface Characteristics
Fixed Port 4*1/10G uplink SFP+ fiber ports (Data) 1*Console RS232 port (115200,N,8,1) 24*10/100/1000Base-T PoE ports (Data/Power)

8*100/1000Base-X SFP fiber ports(Combo port) (Data)
Ethernet Port Port 1-24 can support 10/100/1000Base-T(X) auto-sensing, full/half

duplex MDI/MDI-X self-adaption
Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meters)

100BASE-TX: Cat5 or later UTP(≤100 meters) 1000BASE-T: Cat5e/6 or later UTP(≤100 meters)
Optical Fiber Port Gigabit SFP/10G SFP+ optical fiber interface, default no include optical

modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Optical Fiber Port

Expansion

 Support Turbo overclocking 2.5G optical module expansion and ring

network
Optical Cable/

Distance

 Multi-mode:850nm/ 0-500M, 850nm/ 0-300M (10G)

Single-mode:1310nm/ 0-40KM, 1550nm/ 0-120KM.
Chip Parameter
Network

Management Type

 L2+
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX

IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X
IEEE802.3ae 10GBase-LR/SR, IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 216Gbps (non-blocking)
Forwarding

Rate@64byte

 95.23Mpps
CPU 800MHz
DRAM 1Gbit
FLASH 128Mbit
MAC 16K
Buffer Memory 12Mbit
Jumbo Frame 12000byte
LED Indicator Power: PWR (Yellow), System: SYS (Yellow), Network: Link/Act

(Yellow), PoE: PoE(Green), Fiber port: L/A (Green)
Reset Switch Yes, press and hold the switch for 10 seconds and release it to restore

the factory settings
PoE & Power Supply
PoE Port Port 1 to 24
PoE Management PoE working status display, Port PoE on/off, af/at power distribution
Power Supply Pin 1/2 (+) 3/6(-)
Max Power Per Port 30W, IEEE802.3af/at
Total PWR / Input

Voltage

 400W/ (AC100-240V)
Power Consumption Standby<20W, Full Load<380W
Power Supply Built-in power supply AC100~240V

50-60Hz 5.0A
Physical Parameter
Operation TEMP/

Humidity

 -20~+55°C, 5%~90% RH Non condensing
Storage TEMP/

Humidity

 -40~+75°C, 5%~95% RH Non condensing
Dimension 440*290*44.5mm
Net /Gross Weight <5.0kg / <5.5kg
Installation Desktop,19 inch 1U cabinet
Certification & Warranty
Lightning Protection Lightning protection: 4KV 8/20us, Protection level: IP30
Certification CCC, CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B,

RoHS
Warranty 3 years, lifelong maintenance.
Network Management Features
Interface IEEE802.3x flow control (full duplex) Port exception protection mechanism

Port real-time flow management (Flow Interval) Broadcast storm suppression based on port rate

Optical port SFP module DDMI real-time digital diagnosis

Limit the rate of incoming and outgoing packet traffic, with a minimum granularity of 16Kbps and a maximum of 1Gbps

Port EEE Green Ethernet Energy-Saving configuration and status view

Jumbo frame configuration, the largest 12000byte
Layer 3 Function ARP protocol, 1024 entries at most RIPv1/v2, RIPng , OSPFv1/v2, OSPFv3

Support L2+network management function, support 128 entries of

IPv4/IPv6 static routes, and dual stack management
VLAN VLAN based on MAC, VLAN based on the protocol

Port configuration of Access, Trunk, Hybrid. GVRP VLAN protocol

(4K) VLAN based on port, IEEE802.1q, Voice VLAN, QinQ configuration
Port Aggregation LACP, Static aggregation

Max 14 aggregation groups and 8 ports per group.
Spanning Tree STP BPDU Guard, BPDU filtering and BPDU forwarding

STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
ERPS Ring Network Support ERPS ring network, ring network self-healing time is less than

20ms, ITU-T G.8032
Multicast MLD Snooping, IGMP Snooping, Multicast VLAN User quick log out, MVR (Multicast LAN registration)

IGMP Snooping v1/v2/v3 and 1024 multicast groups at most
Mirroring Bidirectional traffic mirroring for basic ports

Supports one-to-multiple mirroring, supports up to 4 port sessions
QoS Queue Scheduling Algorithm (SP, WRR, SP+WRR) Flow-based Rate Limiting, Stream based redirection

Flow-based Packet Filtering, 8*Output queues of each port

802.1p/DSCP priority mapping, Diff-Serv QoS, Priority Mark/Remark
ACL ACL distribution based on port and VLAN

L2-L4 packet filtering function, matching the first 80 bytes message, and provides ACL definitions based on source MAC address, destination MAC address, source IP address, destination IP address, IP protocol

type, TCP/UDP port, TCP/UDP port range, VLAN, etc.
Security Port based IEEE802.1X authentication

SSL guarantees data transmission security

Quad binding function of IP+MAC+VLAN+ports MAC address learning limit, MAC address black hole

Anti DoS attack, Port broadcast message suppression IP Source Guard function, AAA&RADIUS certification Hierarchical user management and password protection

SSH 2.0 provides a secure encrypted channel for user login Host data backup mechanism, ARP intrusion detection function

Port isolation, IP Source Guard, ARP message speed limit function
DHCP DHCP Client, DHCP Snooping, DHCP Server
Management Web network management (https) Link Layer Discovery Protocol(LLDP) Viewing CPU Instant Utilization Status

NTP clock, One click restore, SNMP V1/V2/V3 Cable status check, Ping detection, System work log NMS platform cluster management (LLDP+SNMP)

Console/AUX Modem/Telnet/CLI command line configuration

FTP, TFTP, Xmodem, SFTP file upload and download management
System Category 5 Ethernet network cable

Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later

TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a

network

Application

Panel Diagram

Dimensions

Order Information

PACKING LIST CONTENT QTY UNIT
36-port 10G uplink managed PoE switch 1 SET
AC Power Cable 1 PC
RJ45-DB9 Line 1 PC
Mounting Kits (Hanging Ear) 1 SET
User Guide 1 PC

Reviews

There are no reviews yet.

Be the first to review “36-Port 10G Uplink Managed PoE Switch BC2124PGM8FC4T-400W Series”

Your email address will not be published. Required fields are marked *

Related products

Scroll to Top