Born Electronics

+44 7859 571344

Call Us

info@bornelectronics.com/born

Email Us

C/O Blake and Ernst 25 Cabot Square, 14th Floor, London, England, E14 4QA

28-Port 10G Uplink Managed Industrial PoE Switch BI9124PGM4T-600WS Series

The BI9124PGM4T-600WS is a 10G uplink managed industrial PoE fiber switch. It has 24*10/100/1000Base-T adaptive RJ45 ports and 4*1/10G SFP+ fiber ports. Port 1-24 can support IEEE802.3af/at PoE standard. Single-port PoE power reaches 30W. As a PoE power supply device, it can automatically detect and recognize power-compliant devices that meet the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, industrial sensor through the network cable, and meet the network environment that needs high-density PoE power supply. It is suitable for intelligent transportation, rail transit, power industry, mining, petroleum, industrial scenes such as shipping, metallurgy, and green energy construction form a cost-effective, stable and reliable communication network.

BI9124PGM4T-600WS has L2+ full network management function, supports IPV4/ IPV6 management, static route full wire-speed forwarding, complete security protection mechanism, complete ACL/QoS policy and rich VLAN functions, and is easy to manage and maintain. Supports multiple network redundancy protocols STP/RSTP/MSTP (<50ms) and (ITU-T G.8032) ERPS(<20ms) to improve link backup and network reliability. When one-way network fails, communication can be quickly restored to ensure important Uninterrupted communication for applications.

According to the actual application needs, port management, routing address management, port flow control, VLAN division, IGMP, security policy and other application services are configured through network management methods such as Web, CLI, SNMP, Telnet, etc. It is suitable for intelligent transportation, rail transit, electric power, mining, metallurgy, and green energy. industrial scenes such as construction set up a cost-effective and stable communication network.

Category:

Features

Gigabit access, 10G uplink

  • Support non-blocking wire-speed forwarding.
  • Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
  • Support Gigabit Ethernet port and 10G SFP+ uplink port combination, which enables users to flexibly build networking to meet the needs of various scenarios.

Intelligent PoE power supply function

  • IEEE802.3af/at PoE standard, without damaging non-PoE devices.
  • PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
  • 24*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
  • Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.

Security

  • 802.1X authentication.
  • Port isolation,Storm control.
  • IP-MAC-VLAN-Port binding.

Strong business processing capability

  • ERPS/STP/RSTP/MSTP.
  • Static and dynamic aggregation.
  • IGMP V1/V2 and IGMP Snooping.
  • IEEE802.1Q VLAN, flexible VLAN division, Voice VLAN, and QinQ configuration.
  • QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including EQU, SP, WRR & SP+WRR.
  • ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.

Stable and reliable

  • CCC,CE, FCC, RoHS.
  • Low power consumption, galvanized steel casing. The fan active cooling.
  • The user-friendly panel can show the device status through the LED indicator of PWR, Link, L/A, PoE.
  • Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.

Easy operation and maintenance management

  • HTTPS, SSLV3, and SSHV1/V2.
  • RMON, system log, LLDP, and port traffic statistics.
  • CPU monitoring, memory monitoring, Ping test, and cable diagnose.
  • Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).

Specifications

Model

BI9124PGM4T-600WS

BI9124PGM4T-600WS-at
Interface Characteristics
Fixed Port 2*AC100-240V input ports Alarm switch port (FAULT) 1*Console port (115200, N, 8,1)

4*1/10G uplink SFP+ ports (Data) 24*10/100/1000Base-T PoE ports (Data/Power)

1 group of DC48-57V input ports (Support reverse polarity protection

function)
Ethernet Port Port 1-24 support 10/100/1000Base-T auto-sensing, full/half duplex

MDI/MDI-X self-adaption
Twisted Pair Transmission 10BASE-T: Cat3,4,5 UTP(≤100 meters)

100BASE-TX: Cat5 or later UTP(≤100 meters) 1000BASE-T: Cat5e/6 or later UTP(≤100 meters)
Optical Fiber Port Gigabit SFP optical fiber port and 10G SFP+ optical fiber port, default no

include optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Optical Fiber Port

Expansion

 Support Turbo overclocking 2.5G optical module expansion and ring

network
Optical Cable/

Distance

 Multi-mode: 850nm/ 0-500M(1G), 850nm/ 0-300M(10G),

Single-mode: 1310nm/ 0-40KM, 1550nm/ 0-120KM.
Chip Parameter
Network Management Type L2+
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X

IEEE802.3ae 10GBase-LR/SR, IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 336Gbps
Forwarding

Rate@64byte

 95.23Mpps
CPU 800MHz
DRAM 1GB
FLASH 128MB
MAC 16K
Buffer Memory 12MB
Jumbo Frame 12KB
LED Indicator Power: PWR(Green), System: SYS (Green), Network:Link (Yellow),

PoE: PoE (Green), Fiber port: L/A (Green)
Reset Switch Yes, press and hold the switch for 10 seconds and release it to restore

the factory settings
PoE & Power Supply
PoE Port Port 1 to 24 IEEE802.3af/at
PoE Management PoE working status display, Port PoE on/off, af/at power distribution
Power Supply Pin 1/2(+) 3/6(-)
Max Power Per Port 30W, IEEE802.3af/at
Total PWR / Input

Voltage

 2*600W(AC100-240V)
Power Consumption Standby<22W, Full Load<600W
Power Supply Built-in power supply, AC 100~240V 50-60Hz 6.6A
Power Input Port 1 group of DC48-57V input port

Alarm switch port, 1 group of AC power input ports

Dual input power port design: AC power supply priority, support

anti-reverse protection, power-off automatic switching DC connection.
Physical Parameter
Operation TEMP /

Humidity

 -40~+80°C, 5%~90% RH Non condensing
Storage TEMP /

Humidity

 -40~+85°C, 5%~95% RH Non condensing
Dimension (L*W*H) 440*378*44.5mm
Net /Gross Weight <6.5kg / <6.8kg
Installation Desktop, 19 inch 1U cabinet
Certification & Warranty
Lightning Protection Lightning protection: 6KV 8/20us, Protection level: IP30 IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge IEC61000-4-3(RS):10V/m(80~1000MHz)

IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV

IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz) IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s

IEC61000-4-9(pulsed magnet field):1000A/m

IEC61000-4-10(damped oscillation):30A/m 1MHz IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV

IEC61000-4-16(common-mode transmission):30V; 300V,1s FCC Part 15/CISPR22(EN55022):Class B

IEC61000-6-2(Common Industrial Standard)
Mechanical Properties IEC60068-2-6 (anti vibration) IEC60068-2-27 (anti shock)

IEC60068-2-32 (free fall)
Certification CCC, CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B,

RoHS
Warranty 5 years, lifelong maintenance.
Network Management Features
Interface IEEE802.3x flow control (full duplex) Port exception protection mechanism

Port real-time flow management (Flow Interval) Broadcast storm suppression based on port rate

Optical port SFP module DDMI real-time digital diagnosis

Limit the rate of incoming and outgoing packet traffic, with a minimum granularity of 16Kbps and a maximum of 1Gbps

Port EEE Green Ethernet Energy-Saving configuration and status view

Jumbo frame configuration, the largest 12000byte
Layer 3 Features OSPFv1/v2, OSPFv3, Static routing, RIPv1/v2, RIPng The maximum number of ARP protocol entries is 1024

L2+ network management function, Dual stack IPv4/IPv6 management
VLAN VLAN based on MAC, VLAN based on the protocol

Port configuration of Access, Trunk, Hybrid. GVRP VLAN protocol

(4K) VLAN based on port, IEEE802.1q, Voice VLAN, QinQ configuration
Port Aggregation LACP dynamic aggregation, Static aggregation

Max 14 aggregation groups and maximum 8 ports per group.
Spanning Tree STP BPDU Guard, BPDU filtering and BPDU forwarding

STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)
ERPS Ring Network Support ERPS ring network, ring network self-healing time is less than

20ms, ITU-T G.8032
Multicast MLD Snooping, IGMP Snooping, Multicast VLAN User quick log out, MVR (Multicast LAN registration)

IGMP Snooping v1/v2/v3 and 1024 multicast groups at most
Mirroring Bidirectional traffic mirroring for basic ports

Supports 1-to-multiple mirroring, supports up to 4 port sessions
QoS Queue Scheduling Algorithm (SP, WRR, SP+WRR) Flow-based Rate Limiting, Stream based redirection

Flow-based Packet Filtering, 8*Output queues of each port

802.1p/DSCP priority mapping, Diff-Serv QoS, Priority Mark/Remark
ACL ACL distribution based on port and VLAN

L2-L4 packet filtering function, matching the first 80 bytes message, and provides ACL definitions based on source MAC address, destination MAC address, source IP address, destination IP address, IP protocol

type, TCP/UDP port, TCP/UDP port range, VLAN, etc.
Security Port based IEEE802.1X authentication SSL guarantees data transmission security

Quad binding function of IP+MAC+VLAN+ports MAC address learning limit, MAC address black hole

Anti DoS attack, Port broadcast message suppression IP Source Guard function, AAA&RADIUS certification

Hierarchical user management and password protection

SSH 2.0 provides a secure encrypted channel for user login Host data backup mechanism, ARP intrusion detection function

Port isolation, IP Source Guard, ARP message speed limit function
DHCP DHCP Client, DHCP Snooping, DHCP Server
Management Web network management (https) Link Layer Discovery Protocol(LLDP) Viewing CPU Instant Utilization Status

NTP clock, One click restore, SNMP V1/V2C/V3 Cable status check, Ping detection, System work log NMS platform cluster management (LLDP+SNMP)

Console/AUX Modem/Telnet/CLI command line configuration

FTP, TFTP, Xmodem, SFTP file upload and download management
System Category 5 Ethernet network cable

Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later

TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a

network

Application

Panel diagram

Dimensions

Order Information

PACKING LIST CONTENT QTY UNIT
28-port 10G uplink managed industrial PoE fiber switch 1 SET
RJ45-DB9 Line 1 PC
Power Cable 1 PC
Mounting Kits(Hanging Ear) 1 SET
User Guide 1 PC

Reviews

There are no reviews yet.

Be the first to review “28-Port 10G Uplink Managed Industrial PoE Switch BI9124PGM4T-600WS Series”

Your email address will not be published. Required fields are marked *

Related products

Scroll to Top