BI8148PGM4T
- Home
- BI8148PGM4T
52 Ports L2+ Managed PoE Switch BI8148PGM4T-600W Series
BI8148PGM4T-600W is managed PoE switch for security transmission and WIFI coverage, meet the need of PoE power supply for WIFI AP, IP-camera, WIFI Bridge, IP phones and other types of equipment. New generation of High-performance hardware and software platforms are used, providing flexible, cost-effective full Gigabit access and uplink ports, complete security mechanisms, improved ACL / QoS strategy and rich VLAN capabilities. It is easy to manage and maintain, meet the users' requirements for network equipment easy to manage, high security and low cost. Supporting Apollo Cloud One-stop Management Platform, realizing status checking and management monitoring functions, suitable for campus, Hotel and enterprise park network access, convergence, core Multi-application scenarios.
Gigabit wire speed access, 10G uplink
- A combination of Gigabit Ethernet port and 10G uplink SFP+ port to meet the networking requirements of various scenarios.
- Support non-blocking wire-speed forwarding.
- Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.
Intelligent PoE power supply
- 48*10/100/1000Base-T RJ45 ports can support POE power supply to meet the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
- IEEE 802.3af/at PoE standard, without damaging non-PoE devices.
- Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
- PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
Strong business processing capability
- IEEE802.1Q VLAN, flexible VLAN division, Voice VLAN, and QinQ configuration.
- QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including EQU, SP, WRR & SP+WRR.
- ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.
- IGMP V1/V2 and IGMP Snooping.
- ERPS/STP/RSTP/MSTP.
- Static and dynamic aggregation.
Security
- 802.1X authentication.
- Port isolation, Storm control.
- IP-MAC-VLAN-Port binding.
Stable and reliable
- Low power consumption, fan active cooling, galvanized steel casing.
- Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
- CCC, CE, FCC, RoHS.
- The user-friendly panel, it can show the device status through the LED indicator of PWR, Link,PoE.
Easy operation and maintenance management
- Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
- HTTPS, SSLV3, and SSHV1/V2.
- RMON, system log, LLDP, and port traffic statistics.
- CPU monitoring, memory monitoring, Ping test, and cable diagnose.
Model | BI848PGM4T-600W | |
---|---|---|
Interface Characteristics | ||
Fixed Port |
48*10/100/1000Base-T PoE ports (Data/Power)
|
|
Ethernet Port |
10/100/1000Base-T,Auto-sensing,Full/half duplex MDI/MDI-X self-adaption |
|
Twisted Pair |
10BASE-T: Cat3,4,5 UTP(≤100 meter)
|
|
SFP Slot Port |
1/10G SFP+ optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) |
|
Optical Cable/ Distance |
Multimode: 850nm 0 ~ 500M,
|
|
Chip Parameter | ||
Network Management Type |
L2+ |
|
Network Protocol |
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;
|
|
Forwarding Mode |
Store and Forward(Full Wire Speed) |
|
Switching Capacity |
598Gbps |
|
Forwarding |
131Mpps |
|
MAC |
32K |
|
Buffer Memory |
32M |
|
Jumbo Frame |
9.6K |
|
LED Indicator |
Power: PWR (yellow), System : SYS (yellow), Network: Link/Act (yellow); SFP: L/A (green), PoE: PoE (green) |
|
Reset Switch |
Yes, One-button factory reset |
|
PoE & Power | ||
PoE Port |
Port 1 to port 48 |
|
PoE Management |
Total power limit of PoE power supply
|
|
Power Supply Pin |
Default: 1/2 (+), 3/6 (-) |
|
Max Power Per Port |
30W; IEEE802.3af/at |
|
Total PWR / Input Voltage |
600W (AC100-240V) |
|
Power Consumption |
Standby:<35W;Full load:<600W |
|
Power Input Interface |
Dual input power interface, AC power supply priority, support anti-reverse protection, power-off automatic switching DC connection;
|
|
Power Supply |
Built-in power supply, AC100~240V 50-60Hz 6.6A |
|
Physical Parameter | ||
Operation TEMP / Humidity |
-40~+80°C;5%~90% RH Non condensing |
|
Storage TEMP / Humidity |
-40~+85°C;5%~95% RH Non condensing |
|
Dimension (L*W*H) |
440*298*44.5mm |
|
Net /Gross Weight |
<5.0kg / <5.8kg |
|
Installation |
Desktop, 19 inch 1U cabinet |
|
Certification & Warranty | ||
Lightning protection / Protection level |
Lightning protection: 6KV 8/20us; Protection level: IP30
|
|
Mechanical Properties |
IEC60068-2-6 (anti vibration)
|
|
Certification |
CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS |
|
Warranty |
5 years, lifelong maintenance. |
|
Network Management Features | ||
Interface |
IEEE802.3X (Full-duplex)
|
|
Layer 3 Features |
L2+ Network management
|
|
VLAN |
4K VLAN based on port, IEEE802.1q
|
|
Port Aggregation |
LACP, Static aggregation
|
|
Spanning Tree |
STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s) |
|
Industrial Ring |
G.8032 (ERPS),Recovery time less than 20ms
|
|
Multicast |
IGMP Snooping v1/v2, Max 1024 multicast groups, Fast log out
|
|
Port Mirroring |
Bidirectional data mirroring based on port |
|
QoS |
Diff-Serv QoS, Priority Mark/Remark
|
|
ACL |
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.
|
|
Security |
User hierarchical management and password protection
|
|
DHCP |
DHCP Client, DHCP Snooping, DHCP Server, DHCP Relay |
|
Management |
Console/AUX Modem/Telnet/SSH2.0 CLI
|
|
System |
Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;
|
Model |
Description |
---|---|
BI8148PGM4T-600W |
L2+ managed industrial PoE switch with 48* 10/100/1000M RJ45 ports and 4*1/10G SFP+ fiber slot ports, Port 1-48 can support IEEE 802.3af/at PoE standard, Built-in 600W power supply. Support 1U/19 inch rack installation. |
Note :Industrial PoE switch does not match SFP module. |
PACKING LIST | CONTENT | QTY | UNIT |
---|---|---|---|
52-port 10G uplink managed industrial PoE switch | 1 | SET | |
AC Power Cable | 1 | PC | |
RJ45-DB9 Line | 1 | PC | |
Mounting Kits | 1 | SET | |
User Guide | 1 | PC |