BI9148PGM4T

52-Ports 10G Uplink Managed PoE Switch BI9148PGM4T-600WS Series

The BI9148PGM4T-600WS is a 10G uplink managed industrial PoE fiber switch. It has 48*10/100/1000Base-T adaptive RJ45 ports and 4*1/10G SFP+ fiber ports. Port 1-48 can support IEEE802.3af/at PoE standard. Single-port PoE power reaches 30W. As a PoE power supply device, it can automatically detect and recognize power-compliant devices that meet the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, industrial sensor through the network cable, and meet the network environment that needs high-density PoE power supply. It is suitable for intelligent transportation, rail transit, power industry, mining, petroleum, industrial scenes such as shipping, metallurgy, and green energy construction form a cost-effective, stable and reliable communication network.

BI9148PGM4T-600WS has L2+ full network management function, supports IPV4/ IPV6 management, static route full wire-speed forwarding, complete security protection mechanism, complete ACL/QoS policy and rich VLAN functions, and is easy to manage and maintain. Supports multiple network redundancy protocols STP/RSTP/MSTP (<50ms) and (ITU-T G.8032) ERPS (<20ms) to improve link backup and network reliability. When one-way network fails, communication can be quickly restored to ensure important Uninterrupted communication for applications. According to the actual application needs, port management, routing address management, port flow control, VLAN division, IGMP, security policy and other application services are configured through network management methods such as Web, CLI, SNMP, Telnet, etc. It is suitable for intelligent transportation, rail transit, electric power, mining, metallurgy, and green energy. Industrial scenes such as construction set up a cost-effective and stable communication network.

Gigabit access, 10G uplink

  • Support non-blocking wire-speed forwarding.
  • Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
  • Support Gigabit Ethernet port and 10G SFP+ uplink port combination, which enables users to flexibly build networking to meet the needs of various scenarios.

Intelligent PoE power supply function

  • IEEE802.3af/at PoE standard, without damaging non-PoE devices.
  • PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
  • 48*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
  • Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.

Strong business processing capability

  • ERPS/STP/RSTP/MSTP.
  • Static and dynamic aggregation.
  • IGMP V1/V2 and IGMP Snooping.
  • IEEE802.1Q VLAN, flexible VLAN division, Voice VLAN and QinQ configuration.
  • QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including Equ, SP, WRR & SP+WRR.
  • ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.

Security

  • 802.1X authentication.
  • Port isolation, Storm control.
  • IP-MAC-VLAN-Port binding.

Stable and reliable

  • CCC, CE, FCC, RoHS.
  • Low power consumption, galvanized steel casing. The fan active cooling.
  • The user-friendly panel can show the device status through the LED indicator of PWR, Link, L/A, PoE.
  • Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.

Easy operation and maintenance management

  • HTTPS, SSLV3, and SSHV1/V2.
  • RMON, system log, LLDP, and port traffic statistics.
  • CPU monitoring, memory monitoring, Ping test, and cable diagnose.
  • Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
Model BI9148PGM4T-600WS
Interface Characteristics

Fixed Port

2*AC100-240V input ports
Alarm switch port (FAULT)
1*Console port (115200, N, 8,1)
4*1/10G uplink SFP+ ports (Data)
48*10/100/1000Base-T PoE ports (Data/Power)
1 group of DC48-57V input ports (Support reverse polarity protection function)

Ethernet Port

Port 1-48 support 10/100/1000Base-T auto-sensing, full/half duplex
MDI/MDI-X self-adaption

Twisted Pair
Transmission

10BASE-T: Cat3,4,5 UTP(≤100 meters)
100BASE-TX: Cat5 or later UTP(≤100 meters)
1000BASE-T: Cat5e/6 or later UTP(≤100 meters)

Optical Fiber Port

Gigabit SFP optical fiber port and 10G SFP+ optical fiber port, default no include optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)

Optical Fiber Port Expansion

Support Turbo overclocking 2.5G optical module expansion and ring network

Optical Cable/ Distance

Multi-mode: 850nm / 0-500M(1G), 850nm /0-300M(10G),
Single-mode: 1310nm / 0-40KM, 1550nm / 0-120KM.

Chip Parameter

Network Management Type

L2+

Network Protocol

IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-X
IEEE802.3ae 10GBase-LR/SR, IEEE802.3x

Forwarding Mode

Store and Forward(Full Wire Speed)

Switching Capacity

368Gbps (non-blocking)

Forwarding
Rate@64byte

131Mpps

CPU

Dual core 1GHz

DRAM

2GB

FLASH

256MB

MAC

32K

Buffer Memory

16MB

Jumbo Frame

12KB

LED Indicator

Power: PWR(Green), System: SYS (Green), Network: Link (Yellow),
PoE: PoE (Green), Fiber port: L/A (Green)

Reset Switch

Yes, press and hold the switch for 10 seconds and release it to restore the factory settings

PoE & Power Supply

PoE Port

Port 1 to 48 IEEE802.3af/at

PoE Management

PoE working status display, Port PoE on/off, af/at power distribution

Power Supply Pin

1/2 (+) 3/6(-)

Max Power Per Port

30W, IEEE802.3af/at

Total PWR / Input Voltage

2*600W(AC100-240V)

Power Consumption

Standby<35W, Full Load<600W

Power Supply

Built-in power supply, AC 100~240V 50-60Hz 6.6A*2

Power Input Port

1 group of DC48-57V input port
Alarm switch port, 1 group of AC power input ports
Dual input power port design: AC power supply priority, support
anti-reverse protection, power-off automatic switching DC connection.

Physical Parameter

Operation TEMP / Humidity

-40~+80°C, 5%~90% RH Non condensing

Storage TEMP / Humidity

-40~+85°C, 5%~95% RH Non condensing

Dimension (L*W*H)

440*378*44.5mm

Net /Gross Weight

<6.8kg / <7.5kg

Installation

Desktop, 19 inch 1U cabinet

Certification & Warranty

Lightning protection / Protection level

Lightning protection: 6KV 8/20us, Protection level: IP30
IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV
IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s
IEC61000-4-9(pulsed magnet field):1000A/m
IEC61000-4-10(damped oscillation):30A/m 1MHz
IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
IEC61000-4-16(common-mode transmission):30V; 300V,1s
FCC Part 15/CISPR22(EN55022):Class B
IEC61000-6-2(Common Industrial Standard)

Mechanical Properties

IEC60068-2-6 (anti vibration)
IEC60068-2-27 (anti shock)
IEC60068-2-32 (free fall)

Certification

CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS

Warranty

5 years, lifelong maintenance.

Network Management Features

Interface

IEEE802.3x flow control (full duplex)
Port exception protection mechanism
Port real-time flow management (Flow Interval)
Broadcast storm suppression based on port rate
Optical port SFP module DDMI real-time digital diagnosis
Limit the rate of incoming and outgoing packet traffic, with a minimum
granularity of 16Kbps and a maximum of 1Gbps
Port EEE Green Ethernet Energy-Saving configuration and status view
Jumbo frame configuration, the largest 12000byte

Layer 3 Features

ARP protocol, 1024 entries at most
RIPv1/v2, RIPng , OSPFv1/v2, OSPFv3
Support L2+network management function, support 128 entries of
IPv4/IPv6 static routes, and dual stack management

VLAN

VLAN based on MAC, VLAN based on the protocol
Port configuration of Access, Trunk, Hybrid. GVRP VLAN protocol
(4K) VLAN based on port, IEEE802.1q, Voice VLAN, QinQ configuration

Port Aggregation

LACP dynamic aggregation, Static aggregation
Max 26 aggregation groups and maximum 8 ports per group.

Spanning Tree

STP BPDU Guard, BPDU filtering and BPDU forwarding
STP (IEEE802.1d), RSTP (IEEE802.1w), MSTP (IEEE802.1s)

ERPS Ring Network

Support ERPS ring network, ring network self-healing time is less than 20ms, ITU-T G.8032

Multicast

MLD Snooping, IGMP Snooping, Multicast VLAN
User quick log out, MVR (Multicast LAN registration)
IGMP Snooping v1/v2/v3 and 1024 multicast groups at most

Mirroring

Bidirectional traffic mirroring for basic ports
Supports 1-to-multiple mirroring, supports up to 4 port sessions

QoS

Queue Scheduling Algorithm (SP, WRR, SP+WRR)
Flow-based Rate Limiting, Stream based redirection
Flow-based Packet Filtering, 8*Output queues of each port
802.1p/DSCP priority mapping, Diff-Serv QoS, Priority Mark/Remark

ACL

ACL distribution based on port and VLAN
L2-L4 packet filtering function, matching the first 80 bytes message, and
provides ACL definitions based on source MAC address, destination
MAC address, source IP address, destination IP address, IP protocol
type, TCP/UDP port, TCP/UDP port range, VLAN, etc.

Security

Port based IEEE802.1X authentication
SSL guarantees data transmission security
Quad binding function of IP + MAC + VLAN + ports
MAC address learning limit, MAC address black hole
Anti DoS attack, Port broadcast message suppression
IP Source Guard function, AAA&RADIUS certification
Hierarchical user management and password protection
SSH 2.0 provides a secure encrypted channel for user login
Host data backup mechanism, ARP intrusion detection function
Port isolation, IP Source Guard, ARP message speed limit function

DHCP

DHCP Client, DHCP Snooping, DHCP Server

Management

Web network management (https)
Link Layer Discovery Protocol(LLDP)
Viewing CPU Instant Utilization Status
NTP clock, One click restore, SNMP V1/V2C/V3
Cable status check, Ping detection, System work log
NMS platform cluster management (LLDP+SNMP)
Console/AUX Modem/Telnet/CLI command line configuration
FTP, TFTP, Xmodem, SFTP file upload and download management

System

Category 5 Ethernet network cable
Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network

PACKING LIST CONTENT QTY UNIT
52-port 10G uplink managed industrial PoE switch 1 SET
AC Power Cable 1 PC
RJ45-DB9 Line 1 PC
Mounting Kits 1 SET
User Guide 1 PC