BI8124PGM4T

28-Port 10G Uplink Managed Industrial PoE Switch BI8124PGM4T-400WS Series

The BI8124PGM4T-400WS series is a 10G uplink managed industrial PoE fiber switch. It has 24*10/100/1000Base-T RJ45 ports and 4*1/10G SFP+ fiber slot ports. Port 1-24 can support IEEE 802.3af/at standard PoE power supply. Single port PoE power reaches 30W, and the maximum PoE output power is 400W (at-600W). As a PoE power supply device, it can automatically detect and recognize power-compliant devices that meet the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, industrial sensor through the network cable, and meet the network environment that needs high-density PoE power supply. It is suitable for intelligent transportation, rail transit, power industry, mining, petroleum, Industrial scenes such as shipping, metallurgy, and green energy construction form a cost-effective, stable and reliable communication network.

The BI8124PGM4T-400WS has the L2+ full network management function, supports IPV4/IPV6 management, supports static route full line rate forwarding, supports complete security protection mechanism, complete ACL/QoS policy and rich VLAN functions, and is easy to manage and maintain. Supports multiple network redundancy protocols STP/RSTP/MSTP (<50ms) and (ITU-T G.8032) ERPS to improve link backup and network reliability. When one-way network fails, communication can be quickly restored to ensure important uninterrupted communication for applications. According to the actual application requirements, you can configure multiple application services such as PoE power management, port traffic control, VLAN division, and SNMP through the Web network management mode.

Gigabit access, 10G uplink

  • All series supports “Gigabit Ethernet port and 10G SFP+ uplink port “combination, which enables users to flexibly build networking to meet the needs of various scenarios.
  • Support non-blocking wire-speed forwarding.
  • Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.

Intelligent PoE power supply function

  • 24*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
  • IEEE 802.3af/at PoE standard, without damaging non-PoE devices.
  • Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
  • PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.

Strong business processing capability

  • IEEE802.1Q VLAN, flexible VLAN division, Voice VLAN and QinQ configuration.
  • QoS, Priority mode based on 802.1P, Port & DSCP, queue scheduling algorithm including Equ, SP, WRR & SP+WRR.
  • ALC, filter data packet through configuring matching rules, processing operation & time permission, and provide flexible and safe access control.
  • IGMP V1/V2 and IGMP Snooping.
  • ERPS/STP/RSTP/MSTP.
  • Static and dynamic aggregation.

Security

  • 802.1X authentication.
  • Port isolation, Storm control.
  • IP-MAC-VLAN-Port binding.

Stable and reliable

  • Low power consumption, galvanized steel casing, the fan active cooling.
  • Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
  • CCC, CE, FCC, RoHS.
  • The user-friendly panel, it can show the device status through the LED indicator of PWR, Link, L/A, PoE.

Easy operation and maintenance management

  • HTTPS, SSLV3, and SSHV1/V2.
  • RMON, system log, LLDP, and port traffic statistics.
  • CPU monitoring, memory monitoring, Ping test, and cable diagnose.
  • Web management, CLI command line (Console, Telnet), SNMP (V1/V2/V3).
Model BI8124PGM4T-400WS
Interface Characteristics

Fixed Port

24*10/100/1000Base-T PoE ports (Data/Power)
4*1/10G uplink SFP+ fiber slot ports (Data)
1*Console RS232 port (115200,N,8,1)

Ethernet Port

Port 1-24 support 10/100/1000Base-T,auto-sensing,Full/half duplex
MDI/MDI-X self-adaption

Twisted Pair
Transmission

10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-T: Cat5e or later UTP(≤100 meter)

Optical Fiber Port

Gigabit SFP /10G SFP+ optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)

Optical Cable/ Distance

Multi-mode: 850nm / 0 ~ 500M(1.25G), 850nm / 0 ~ 300M (10G);
Single mode: 1310nm / 0 ~ 40KM, 1550nm 、0 ~ 120KM.

Chip Parameter

Network Management Type

L2+

Network Protocol

IEEE802.3 10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX , IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X
IEEE802.3ae 10GBase-LR/SR
IEEE802.3x

Forwarding Mode

Store and Forward(Full Wire Speed)

Switching Capacity

598Gbps (non-blocking)

Forwarding
Rate@64byte

95.23Mpps

MAC

32K

Buffer Memory

32M

Jumbo Frame

9.6K

LED Indicator

Power: PWR (yellow), system: SYS (yellow); network: Link (yellow);
PoE: PoE (green); Fiber port : L/A (green)

Reset Switch

Yes, support one key to restore factory settings

PoE & Power

PoE Port

Port 1 to 24

PoE Management

PoE working status
Delay start of power supply
PoE output priority configuration
Scheduling of PoE operation and time
Total power limit of PoE power supply
PoE output power allocation, off& af & at

Power Supply Pin

Default: 1/2 (+), 3/6 (-)

Max Power Per Port

30W, IEEE802.3af/at

Total PWR / Input Voltage

400W (AC100-240V)

Power Consumption

Standby<25W; Full Load<400W

Power Input Interface

Dual input power interface design, AC power supply priority, support anti-reverse protection, power-off automatic switching DC connection;
2 sets of DC12-48V input interface;
1-way alarm switch interface; 1 set of AC power input interface

Heat Dissipation

Low noise fan active cooling

Power Supply

Built-in power supply, AC 100~240V 50-60Hz 5A

Physical Parameter

Operation TEMP / Humidity

-40~+80°C;5%~90% RH Non condensing

Storage TEMP / Humidity

-40~+85°C;5%~95% RH Non condensing

Dimension (L*W*H)

440*300*45mm

Net /Gross Weight

<4.4kg / <5.0kg

Installation

Desktop type ,19 inch 1U cabinet installation

Certification & Warranty

Lightning protection / Protection level

Lightning protection: 6KV 8/20us; Protection level: IP30
IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV
IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s
IEC61000-4-9(pulsed magnet field):1000A/m
IEC61000-4-10(damped oscillation):30A/m 1MHz
IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
IEC61000-4-16(common-mode transmission):30V; 300V,1s
FCC Part 15/CISPR22(EN55022):Class A
IEC61000-6-2(Common Industrial Standard)

Mechanical Properties

IEC60068-2-6 (anti vibration)
IEC60068-2-27 (anti shock)
IEC60068-2-32 (free fall)

Certification

CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS

Warranty

5 years, lifelong maintenance.

Network Management Features

Interface

IEEE802.3X (Full-duplex)
Port temperature protection setting
Port green Ethernet Energy-saving setting
Broadcast storm control based on port speed
The speed limit of the message flow in the access port.
The minimum particle size is 64Kbps.

Layer 3 Features

L2+ network management ,IPV4/IPV6 management
L3 soft routing forwarding,
Static route, Default route @ 128 pcs, APR @ 1024 pcs

VLAN

4K VLAN based on port, IEEE802.1q
VLAN based on the protocol
VLAN based on MAC
Voice VLAN, QinQ configuration
Port configuration of Access, Trunk, Hybrid

Port Aggregation

LACP, Static aggregation
Max 14 aggregation groups and 8 ports per group.

Spanning Tree

STP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s)

Industrial Ring
Network Protocol

G.8032 (ERPS),Recovery time less than 20ms
250 Ring at most, Max 1024 devices per ring.

Multicast

MLD Snooping v1/v2,Multicast VLAN
IGMP Snooping v1/v2, Max 250 multicast groups, Fast log out

Port Mirroring

Bidirectional data mirroring based on port

QoS

Flow-based Rate Limiting
Flow-based Packet Filtering
8*Output queues of each port
802.1p/DSCP priority mapping
Diff-Serv QoS, Priority Mark/Remark
Queue Scheduling Algorithm (SP, WRR, SP+WRR)

ACL

Port-based Issuing ACL,ACL based on port and VLAN
L2 to L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC address, IP Source, Destination IP, IP
Protocol Type, TCP/UDP Port, TCP/UDP Port Range, and VLAN, etc.

Security

IP-MAC-VLAN-Port binding
ARP inspection, Anti-DoS attack
AAA & RADIUS,MAC learning limit
Mac black holes, IP source protection
IEEE802.1X & MAC address authentication
Broadcast storm control, Backup for host datum
SSH 2.0,SSL,Port isolation, ARP message speed limit
User hierarchical management and password protection

DHCP

DHCP Client, DHCP Snooping, DHCP Server, DHCP Relay

Management

One-key recovery
Cable Diagnose, LLDP
Web Management (HTTPS)
NTP, System work log, Ping Test
CPU instant utilization status view
Console/AUX Modem/Telnet/SSH2.0 CLI
Download & Management on FTP, TFTP, Xmodem, SFTP,SNMP V1/V2C/V3
NMS - smart network management system platform(LLDP+SNMP)

System

Category 5 Ethernet network cable
Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in a network

PACKING LIST CONTENT QTY UNIT
28-port 10G uplink managed industrial PoE fiber switch 1 SET
AC Power Cable 1 PC
RJ45-DB9 Line 1 PC
Mounting Kits(Hanging Ear) 1 SET
User Guide 1 PC