BT-SFP-IG05

1250Mbps 850nm Multi-Mode 550m Industrial SFP Transceiver BT-SFP-IG05

BT-SFP-IG05 transceiver is compliant with SFP MSA, high performance at low cost, which supports operating data-rate up to 1250Mbps.

The transmitter section and receiver section work independently in the transceiver. The receiver section contains an InGaAs Pin photodiode, a transmipedance amplifier and a post amplifier (with working data rate up to 1250 Mbps), functionally transmit received optical power into steady electrical data. The transmitter section contains an 850nm VCSEL laser diode with back-face monitor and a laser driver with APC function, transmitting input electrical data to steady optical output signal.

The product is fully compliant with the SFP MSA such as the LC optical interface receptacle, 3.3V supply voltage, TTL signal detect logic.

  • 850nm VCSEL emission wavelength
  • InGaAs photodiode pin receiver
  • Operation data up to 1250Mbps
  • Compliant with SFP MSA and SFF-8472
  • Industrial standard small package.
  • Double LC receptable
  • Single 3.3V power supply
  • Differential LVPECL input /output
  • TTL Signal detect function
  • Support hot-swap

Operating information

Model

Input/ Output

Signal

detection

Power supply

Operating

Temperature

BT-SFP-IG05

AC/AC

TTL

+3.3V

-40℃ to 75℃



Absolute maximum ratings

Parameter

symbol

min

max

unit

Storage temperature

Ts

-40

+85

°C

Operating temperature

To

-40

+75

°C

Power supply

Vcc

-0.5

+3.7

V




BT-SFP-G05 (850nm VCSEL and PIN, 550m)

Transmit optical, electrical characteristics

Parameter

Symbol

Min.

Typ.

Max.

Unit

Note

Input Differential Impedance

Rin

100

Ω

Transmit Differential Input

Voltage

VinPP

300

1600

mV

Transmit disable input high voltage

2.0

V

Transmit disable input low voltage

0.8

V

Transmit fault input high voltage

2.0

V

Transmit fault input low voltage

0.8

V

Transmit disable assert time

0.14

5

us

Launch optical power

Po

-9.5

-3

dBm

Extinction ratio

ER

10

dB

Central wavelength

l

850

nm

Output spectrum width

Dl

0.85

nm



Receive electrical ,optical characteristics

parameter

symbol

min

tipical

max

unit

note

Receiver differential output signal

VoutPP

400

1600

mV

Receiver loss of signal Voltage high

2

nm

Receiver loss of single voltage low

0.8

dBm

Receiver sensitivity

Sen

-17

dBm

Maximum input power

PinMAX

-3

dBm

-

Signal detect range

-35

-18

dBm

-

Signal detect hysteresis

0.5

dB

-


  • Routing or server
  • Switched backplane applications
  • Other optical transmission systems

Model

Specification

Package

Data

Rate

Tx

Pout

Rx

Sensiti

vity

Top

Reach

others

BT-SFP-IG05

SFP

1.25G/s

850

VCSEL

-9.5~-

3dBm

850 PIN

<-

17dBm

-40~75

550m

3.3V,LC